Functions shall represent the various functions or services carried out by the ULBs. Functions are provided through various responsibilities centres called Departments.
Functions of the ULB can have three levels within it.
The first level under this group represents various functions both obligatory and discretionary. Identified as 0 in the template.
The second Level in function would represent the particular type of service under a function, known as “Function Description”. Identified as 1 in the template
The third level will represent a particular cost centre, Known as “Cost Centre”, which provides the service. Identified as 2 in the template.
The data given in the table is sample data.
Download the data template attached to this page.
Have it open and go through all the headers and understand the meaning of them by referring 'Data Definition' section.
Make sure all the headers, its data type, field size and its definition/ description is understood properly. In case of any doubt, please reach out to the person who has shared this document with you to discuss the same and clear out the doubts.
Identify all different types of Function in the ULB.
Start filling the data starting from serial no. and complete a record at once. repeat this exercise until the entire data is filled into a template.
Verify the data once again by going through the checklist and taking care of each and every point mentioned in the checklist.
The checklist is a set of activities to be performed once the data is filled into a template to ensure data type, size, and format of data is as per the expectation. These activities have been divided into 2 groups as given below.
This checklist covers all the activities which are common across the entities.
This checklist covers the activities which are specific to the entity.
Configuration Data Templateconfiguration-data-template-function.xlsx - 10KB
Sample Datasample-confugration-data-function.xlsx - 10KB
All content on this page by eGov Foundation is licensed under a Creative Commons Attribution 4.0 International License.
*Sr. No.
*Name
*Code
*Level
Parent Type
Parent Code
1
General Administration
10
0
Nil
Nil
2
GENERAL ADMINISTRATION: Administration
1011
1
General Administration
10
3
General Department
101100
2
GENERAL ADMINISTRATION: Administration
1011
4
Public Works
20
0
Nil
Nil
5
PUBLIC WORKS: Roads and Pavement
2021
1
Public Works
20
6
Roads and Building Maintenance
202101
2
PUBLIC WORKS: Roads and Pavement
2021
Sr No
Column Name
Data Type
Data Size
Is Mandatory?
Definition/ Description
1
Name
Text
250
Yes
To indicate the Function name, User can select a particular function code while recording a transaction in the system. This will facilitate in generating a report at the function level
2
Code
Alphanumeric
50
Yes
The unique code is given to the individual function. Child functions have to follow number pattern starting with the parent code
3
Level
Numeric
50
Yes
As per NMAM, the Function can be defined in the tree structure, so the Level indicates the structure in which the function would be setup. Root nodes will be level 0 and the next level funds will have value as 1 and the next level as value 2
4
Parent Type
Text
250
No
If the ULB’s using multiple Functions then a Hierarchy of “Parent-Child “can be set up for the Function, so under each Parent Function a multiple child function can be set up
5
Parent Code
Alphanumeric
50
No
The unique code representing the parent type function
Sr. No
Checklist Parameter
Example
1
Make sure that each and every point in this reference list has been taken care of.
Sr. No.
Checklist Parameter
Example
1
The Function Name should not contain any special characters
General Administration : [Allowed]
#General Administration! : [Not allowed]
2
The Function Code that is defined by the state team should be alphanumeric and Unique.
10, 1011 or 101100