The Counter Employee (CE) represents the ULB employee responsible for assisting the citizens with water and sewerage connection related activities. The W&S module provides the CE with the scope to submit applications for new connections on behalf of the citizens or collect payment for the citizen bills at the counter.
The CE can -
The CEs can apply for new water or sewerage connection applications and submit it on behalf of the citizens.
To apply for new connections
Click on the Water & Sewerage menu option in the sidebar or the Water & Sewerage card on the DIGIT home page.
Click on the New Application button available on the top right corner of the page. Follow the steps iterated in the Citizens Apply for new connections section to apply for new connections.
The W&S portal enables CEs and other ULB employees to search for specific applications or connections using different search parameters.
To search for W&S connections
Click on the Water & Sewerage menu option in the sidebar or the Water & Sewerage card on the DIGIT home page. The Search Connections tab on the page displays the various search parameters that filter the search for specific connections. Enter the applicable City. This is a mandatory search filter.
Enter the Property ID, or Owner Mobile No., or Consumer Number, or the Old Consumer Number to filter the view of connections based on the specified parameter. Click on the Search button to view the search results. Click on the Reset button to renew the search using different parameters.
To search for W&S applications
Click on the Water & Sewerage menu option in the sidebar or the Water & Sewerage card on the DIGIT home page. Click on the Search Applications tab.
Enter the Consumer No. or Application Number, or Owner Mobile No., or Application Type to filter the search for applications. The application search can also be filtered by Application Status or defining a specific period in the From Date and To Date fields. The system fetches the applications created between the specified period or after the specified date.
Click on the Search button to view the search results. Click on the Reset button to renew the search using different parameters.
CEs add the meter readings for each connection to generate monthly bills based on the recorded usage.
To add meter readings
Search for the specific connection using relevant search parameters. Click on the Consumer Number link available for listed connections. Click on View Consumption Details available in the Service Details panel.
Click on the Add Meter Reading button on the top right corner of the Consumption Details page.
The Billing Period by default is set to the last reading date and current reading date.
Select the applicable Meter Status. The meter status can be changed to reflect the current working condition of the meter. Meters can be set to Working, Locked, Breakdown, Non-meter, Reset, or Replacement, as applicable.
Enter the Current Reading in the meter reading page. The system displays the Last Reading and the Last Reading Date. Enter the Current Reading Date. The date field auto-populates the current date by default.
The actual Consumption is automatically calculated by the system. The customer is billed on the basis of the actual consumption.
Click on the Save button to save the reading. This will generate the bill or demand for payment that has to be made by the customer.
Once the application for new water or sewerage connection is approved and the citizen has paid the applicable connection charges, the CE is responsible for activating the new connection.
To activate new connections
Search for the applications that are Pending for Connection Activation. Click on the Application No. to open the application.
Click on the Take Action button and click on Edit option to enter connection activation details.
Review the Connection Details and the list of Documents furnished with the application.
Enter the connection details in the Additional Details section of the application.
Enter the Connection Execution Date. The connection will be activated on the specified date. For metered connections, enter the Meter ID, Meter Installation Date, and Initial Meter Reading (KL).
Click on Next Step to the Summary section of the application. Review the application details. Click on the Take Action button and then click on the Activate Connection option.
Enter any Comments for activating the connection. Click on the Activate Connection button.
The connection activation success message is displayed on the screen. A system generates a unique Consumer No. to identify the connection.
CEs can pay W&S bills for the citizens. The CEs can add penalty or rebates to the bill amount depending on the applicable penalty or rebates available for the customers.
To pay bills
Enter the relevant search parameter to filter the view of W&S connections. Click on the Collect button for the specific connection.
The Bill Details panel displays the pending dues details and its breakup.
Click on the Add Rebate/Penalty button to adjust any penalties or rebates applicable for the customer.
Add the Adhoc Penalty Amount or the Adhoc Rebate Amount. Select the Reason For Adhoc Penalty or Reason for Adhoc Rebate from the given drop-down list. Enter any additional information in the Enter Comments section.
Click on the Add button to add the penalty or rebate amount to the total bill amount. Click on the Download Bill button to download the bill. Click on the Pay button.
Select Full Amount or Custom Amount to specify the full or partial payment of the bill. Enter the Amount to Pay if Custom Amount is selected. Click on the applicable payment tab in the Capture Payment panel.
Enter the required payment details and make the payment. Click on the Generate Receipt button to process the payment.
The payment success acknowledgement message is displayed on the screen. Click on the Download or Print button to download or print the payment receipt.
The W&S module enables CEs to make any changes to the existing water or sewerage connection details in a few simple steps. Such changes may reflect any updates in property details or the connection details.
To modify connection details
Search for the specific connection using applicable search parameters. Click on the Consumer Number link to open the connection details page.
Scroll down the page and click on the Take Action button. Click on Modify Connection.
The system does not allow employees to modify connection details in 2 cases
If there are any pending dues for the connection - the owner has to settle the pending dues before making any modifications to the connection details.
If there is already any other modification application pending for approval - the owner can raise another modification request only once the previous application is approved.
The Modify Connection application form contains 4 sections. The Property Details panel displays the existing property details linked to the connection. Click on the Search Property button to replace the existing property details with another property. Select the applicable Property ID. The change request for property details will be forwarded to the Approver for final approval.
Click on the Modify Property button to make any changes to the existing property. This action is integrated with the Property Tax module. So, whatever changes or edits are requested for the listed property will go through the Edit Property workflow for verification and final approval from the Property Tax department.
Click on the Next Step button to move to the Additional Details section.
Change the Connection Details as required on this page. Users can modify the existing Connection Type, Number of Taps, Water Source, Water Sub Source, and applicable Pipe Size details. Change the Activation Details if required. Enter new meter details in the Meter ID and Meter Installation Date fields.
Enter the Modification Effective From date. The requested changes will be reflected from the selected date. Click on the Next Step button to upload supporting documents for the requested changes.
Select the applicable Documents and then click on Upload Files to attach the selected documents with the application.
Click on the Next Step button to move to the Summary page of the application. Scroll down the page to review the modification requests. The existing connection details are available below the requested changes for easy reference.
Click on the Submit button for processing the modification requests. The application is sent to the Approver for final approval.
The Document Verifier (DV) is responsible for verifying the required and supporting documents uploaded by the citizen with the W&S application. The application is forwarded to the Field Inspector for further review once the DV finds the documents uploaded meet the requirements. Else, the application is either sent back to the citizen for refurbishing the documents or rejected.
DV can
DV can edit application details on behalf of the applicants.
To edit applications
The applications Pending for Document Verification is available on the DIGIT home page. Else, search for the application using the search parameters.
Open the application. Click on the View History button available in the Task Status panel on top to view the list of actions taken on the application so far. Click on the View Breakup button to find the fee breakup details in the Fee Estimate panel.
Click on the Add Rebate/Penalty button to add any ad hoc penalty or rebate amount to the total fee payable. Scroll down the application to review the filled in details. Click on the View button for each uploaded document to review details.
Click on the Take Action button and then click on Edit to make required corrections. Review the Connection Details and the list of Documents furnished with the application.
Enter the connection details in the Additional Details section of the application. Select the applicable Connection Type. Enter the Number of Taps, Water Source, Water Sub Source, and Pipe Size details.
Select ULB if the plumber is provided by the ULB. Else, check the Self option. In case the plumber is provided by the ULB enter the Plumber License No., Plumber Name, and Plumber Mobile No. details.
Select the relevant Road Type. Enter the Area (in sq ft) to indicate the length of road cutting required to lay the pipes. Enter the Connection Execution Date. The connection will be activated on the specified date.
Click on Next Step to the Summary section of the application. Review the application details. Complete the changes and click on the Submit button to save the changes.
DV can send the application back to the citizen for any corrections or if any vital document has not been uploaded.
To send the application back to the citizen
Enter the Application No. or any other search parameter to search for the application. Click on the Application No. link to open the application. Scroll down the application page to review the filled in details.
Click on the View File button to open the documents uploaded in the application. Click on the Take Action button at the bottom of the application page once the review is complete. Click on the Send Back to citizen button if the documents do not meet the application requirements or any document is missing.
State the reasons for sending the application back to the citizen in the Comments section. Click on the Upload Files button to upload any supporting documents. Click on the Send Back button.
The application is placed back in the Citizen queue for required edits.
The DV can reject the application if the documents and information furnished by the citizen do not meet the prescribed guidelines.
To reject the application
Click on the Take Action button at the bottom of the application page once the review is complete. Click on the Reject button if the documents do not meet the application requirements or the information provided in the application is inaccurate.
State the reasons for rejecting the application in the Comments section. Click on the Upload Files button to upload any supporting documents. Click on the Reject button.
The application is rejected and a notification is sent to the applicant informing the same.
The DV verifies and forwards the application if the documents and information provided in the application are found satisfactory and complete.
To verify and forward the application
Click on the Take Action button at the bottom of the application page once the review is complete. Click on the Verify and Forward button once all documents are verified.
Select the applicable Assignee Name who will carry out the next phase of verification. Provide any additional information for the assignee in the Comments section. Click on the Upload Files button to upload any supporting documents. Click on the Verify and Forward button.
The application is forwarded to the field inspector for further processing.
The field inspector or FI is responsible for conducting the field inspection of the connection site and premises. The FI prepares the inspection report based on the observations on the defined inspection parameters.
The FI can
To edit applications
The application Pending for Field Inspection is available on the DIGIT home page. Else, search for the application using the search parameters.
Open the application. Click on the View History button available in the Task Status panel on top to view the list of actions taken on the application so far. Click on the View Breakup button to find the fee breakup details in the Fee Estimate panel.
Click on the Add Rebate/Penalty button to add any ad hoc penalty or rebate amount to the total fee payable.
Scroll down the application to review the filled in details. Click on the View button for each uploaded document to review details. Click on the Take Action button and then click on Edit to make required corrections.
Review the Connection Details and the list of Documents furnished with the application.
Enter the connection details in the Additional Details section of the application. Select the applicable Connection Type. Enter the Number of Taps, Water Source, Water Sub Source, and Pipe Size details.
Select ULB if the plumber is provided by the ULB. Else, check the Self option. In case the plumber is provided by the ULB enter the Plumber License No., Plumber Name, and Plumber Mobile No. details.
Select the relevant Road Type. Enter the Area (in sq ft) to indicate the length of road cutting required to lay the pipes. Enter the Connection Execution Date. The connection will be activated on the specified date. For metered connections, enter the Meter ID, Meter Installation Date, and Initial Meter Reading (KL).
Click on Next Step to the Summary section of the application. Review the application details. Complete the changes and click on the Take Action button to proceed with the required action on the application.
FIs can send the application back to the DV for any corrections or if any vital document has not been uploaded.
To send the application back
Enter the Application No. or any other search parameter to search for the application. Click on the Application No. link to open the application. Scroll down the application page to review the filled in details.
Click on the View File button to open the documents uploaded in the application. Click on the Take Action button at the bottom of the application page once the review is complete. Click on the Send Back button if the documents do not meet the application requirements or any document is missing.
State the reasons for sending the application back to the citizen in the Comments section. Click on the Upload Files button to upload any supporting documents. Click on the Send Back button.
The application is placed back in the DV queue for required edits.
The FI can reject the application if the documents and information furnished by the citizen do not meet the prescribed guidelines.
To reject the application
Click on the Take Action button at the bottom of the application page once the review is complete. Click on the Reject button if the documents do not meet the application requirements or the information provided in the application is inaccurate.
State the reasons for rejecting the application in the Comments section. Click on the Upload Files button to upload any supporting documents. Click on the Reject button.
The application is rejected and a notification is sent to the applicant informing the same.
The FI verifies and forwards the application if the documents and information provided in the application are found satisfactory and complete.
To verify and forward the application
Click on the Take Action button at the bottom of the application page once the review is complete. Click on the Verify and Forward button once the field inspection is complete and found to be satisfactory.
Select the applicable Assignee Name who will carry out the next phase of verification. Provide any additional information for the assignee in the Comments section. Click on the Upload Files button to upload any supporting documents. Click on the Verify and Forward button.
The application is forwarded to the W&S Approver for final approval.
The W&S Approver is responsible for approving or rejecting the application for new water or sewerage connections. Once approved the applicant must pay the connection charges to initiate the activation of the connection. The counter employee fills in the activation details and activates the connection. Post connection activation the system generates a unique consumer number.
The Approver can
To edit applications
The application Pending for Approval is available on the DIGIT home page. Else, search for the application using the search parameters. Open the application.
Click on the View History button available in the Task Status panel on top to view the list of actions taken on the application so far. Click on the View Breakup button to find the fee breakup details in the Fee Estimate panel. Click on the Add Rebate/Penalty button to add any ad hoc penalty or rebate amount to the total fee payable.
Scroll down the application to review the filled in details. Click on the View button for each uploaded document to review details.
Click on the Take Action button and then click on Edit to make the required corrections. Complete the changes and click on the Submit button to save the changes.
The Approver can send the application back to the FI for any corrections or if any vital document has not been uploaded.
To send the application back to the citizen
Enter the Application No. or any other search parameter to search for the application. Click on the Application No. link to open the application. Scroll down the application page to review the filled in details.
Click on the View File button to open the documents uploaded in the application. Click on the Take Action button at the bottom of the application page once the review is complete. Click on the Send Back button if the application does not meet specific requirements or any document is missing.
State the reasons for sending the application back to the FI in the Comments section. Click on the Upload Files button to upload any supporting documents. Click on the Send Back button.
The application is placed back in the FI queue for the required processing.
The Approver can reject the application if the documents and information furnished by the citizen do not meet the prescribed guidelines.
To reject the application
Click on the Take Action button at the bottom of the application page once the review is complete. Click on the Reject button if the documents do not meet the application requirements or the information provided in the application is inaccurate.
State the reasons for rejecting the application in the Comments section. Click on the Upload Files button to upload any supporting documents. Click on the Reject button.
The application is rejected and a notification is sent to the applicant informing the same.
The Approver verifies the application and if the documents and information provided in the application are found satisfactory and complete, the connection request is approved.
To approve connections
Click on the Take Action button at the bottom of the application page once the review is complete. Click on the Approve Connection button once the application is reviewed and verified.
Provide any additional information for the applicant in the Comments section. Click on the Upload Files button to upload any supporting documents. Click on the Approve Connection button.
The application for new water or sewerage connection is approved. The applicant is allotted a unique Consumer Number. The application is now routed back to the citizen to make the payment towards connection charges. Once the payment is done the connection is activated.
An illustrative guide to using Water & Sewerage module
The W&S module allows citizens to apply for new connections and pay bills online. For employees, this module enables automated processing of new connection requests, editing existing connection details, generating water bills, and facilitating online collection of bill payments.
The module supports the following key functions -
Apply for new connections
Pay one-time connection charges for new water or sewerage connections
Pay recurring bills using online payment gateway
Download artefacts such as application details, connection details, bills, receipts, sanction letter and estimation notice
Process applications using configurable workflows
Refer to the table below to understand the different user roles and the scope of action linked to each role. The applicable user roles and action items can vary from one State to another. DIGIT customizes the workflows to suit the requirements defined at the State level.
| User Role | Scope of Action | Role Description |
|---|---|---|
This section guides you through the details of using the [module name] module for each role. Click on the relevant role below to learn more about how to use the module.
All content on this page by eGov Foundation is licensed under a Creative Commons Attribution 4.0 International License.
All content on this page by eGov Foundation is licensed under a Creative Commons Attribution 4.0 International License.
Citizen
Apply for new connection
Pay one-time connection charges
Pay bills
Download artefacts
Individuals and society groups/communities who want to apply for new water or sewerage connections, or pay bills
Counter Employee
Create new applications
Process applications
Edit existing connection details
Add meter reading
Collect connection charges
Collect bill payment
Download bills, receipts, and approval letter for new connections
ULB employees responsible for submitting applications for new connections on behalf of the citizens or pay their bills at the counter
Document Verifier (DV)
Send applications back to citizen
Reject applications
Verify and forward applications
ULB employees responsible for verifying the documents uploaded along with the application
Field Inspector (FI)
Send applications back to citizen
Generate estimation notice
Add additional details
Reject applications
Verify and forward applications
ULB employees responsible for conducting the onsite inspection
Approver
Reject applications
Approve applications
ULB employee responsible for rejecting or approving new connection requests
All employee roles
Search connections/applications
Process new connections/modify applications
View connection details
Download artefacts
Learn how to apply for new water or sewerage connections, pay bills
Citizens represent individuals, groups or communities that are using the W&S module online to manage their water and sewerage connections. The W&S module offers an efficient means of tracking and managing water and sewerage connections.
The citizens can -
Download bills, receipts and approval letters
The Apply for New Connection option allows citizens to submit their application for new water or sewerage connection. Application forms are submitted through the portal for further processing and approval for new connections by the ULB employees.
To apply for new connections
Navigate to the Water & Sewerage menu option in the sidebar. Alternatively, click on the Water & Sewerage card available on the Citizen Services panel on the home page.
Click on the Apply for New Connection option.
The system displays the list of required documents for processing new water or sewerage connections. Click on the Print button below to print the list for reference.
Click on the Apply button to begin filling the application form. The application form contains three sections - Connection Details, Documents, and Summary.
In the Property Details panel enter the Property ID for the new connection. Click on the Find/Create Property ID click here link if you do not remember the property ID or the property is not yet registered in the system. Search for the relevant property details or click on the Register New Property button to register the property.
Click on the Select button available for the relevant property in the search list. This will auto-populate the property details in the application.
The Same as Owner Details box is checked by default in the Connection Holder Details panel. Uncheck this box if the connection holder details are not the same as the property owner. Now enter the connection holder’s Mobile No., Name, Gender, Guardian Name, Relationship with the mentioned guardian, Correspondence Address and Special Applicant Category details.
Check the Water or Sewerage box in the Connection Details panel to indicate the type of connection you are applying for. Check both boxes if the application is for both water and sewerage.
Enter the No. of Taps proposed if you are applying for water connection. Select the applicable value for Pipe Size Proposed (in inches). Enter the required No. of Water Closets and No. of Toilets details for sewerage connection. Click on the Next Step button to proceed to the Documents section of the application.
The system allocates a unique Application No. available on the top of the application form page. Click on the Select Documents drop-down menu to identify the relevant document that will be uploaded as Identity Proof, Address Proof, Building Plan etc.
Click on the Upload File button to attach the documents to the application. Click on the Next Step button to move to the Summary section of the application.
The system displays the success acknowledgement message. Click on the Download or Print button to download or print the application.
The application is processed by the ULB employees who verify the attached documents and carry out field inspections before the final approval. The citizen is allotted a unique consumer number once the application is processed and approved.
Citizens can view their applications to find status details, pending fees to be paid, or any other notifications linked to the application.
To view applications
Click on the My Applications option on the W&S home page.
The system displays all the applications submitted by the citizen and the current status of each application. Click on the View Details button below the application for detailed information on the application status and actions taken on the application.
Click on the View History button available in the Application Summary panel on top. This displays all the tasks completed and in progress along with the date.
The Fee Estimate panel displays the payable application fee details. Click on the View Breakup button to find the fee calculation details.
Click on the Take Action button at the bottom of the application and then click on Pay to make the fee payment. The Pay option is enabled once the application is in Pending for Payment status.
Click on the Download or Print button on the top right corner of the page to download or print the application or the payment receipt.
The W&S module allows citizens to check the meter readings in case they have metered connections.
To check meter readings
Click on My Connections card on the W&S home page. The existing connections for the listed user are available on the screen. Click on the Consumer Number link available for the listed connection.
Click on the View Consumption Details button available in the Service Details panel on the Connection Details page.
The meter reading and current consumption readings are available on the Consumption Details page.
Scroll down the page to view past readings.
Citizens can view their water or sewerage connection details through the portal.
To view connection details
Click on My Connections card on the W&S home page. The existing connections for the listed user are available on the screen. Click on the Consumer Number link available for the listed connection.
The Connection Details page displays the Service Details, Property Details, Owner Details and the Connection Holder Details. Scroll down the page to view these details.
The citizen portal allows users to view their existing connection details and pay water or sewerage bills online.
To view and pay bills
Click on My Connections card on the W&S home page. The existing connections for the listed user are available on the screen.
Click on the Pay Now button available for connections that have pending dues.
Alternatively, click on the Pay Water & Sewerage Bill card on the W&S home page. Enter the required search parameters to search for a specific bill.
Click on the Pay Now button available for connections that have pending dues.
The Bill Details shows the Total Amount, Due Date, and amount breakup details. Scroll down to view the associated Service Details and Property Details. Click on the Download Bill button to download the bill. Click on the Pay button to make the payment.
Select Full Amount or Custom Amount depending on whether you are paying the entire bill amount or making a partial payment or advance payment. Enter the Amount to pay (Rs) in case of Custom Amount. Enter the Payer Details.
Select the relevant option for Payment Paid By. Select Owner if the payment is done by the owner else select Other if someone else is making the bill payment. Enter the Payer Name and Payer Mobile No. In the case of Owner, these details are auto-populated.
Click on the Make Payment button to proceed with the payment. Select the preferred payment method and provide the required payment details. The system displays the payment success acknowledgement message.
Click on the Download or Print button to download or print the payment receipt.
Citizens can view past bill payment details from their portal.
To view past payment details -
Click on the Past Payments option on the W&S home page.
The system displays historic payment details.
Click on the Download Receipt button to download the payment receipt. The Partially Paid status will be displayed if only part of the bill amount is paid.
The Summary page displays the filled in application details. Scroll down the page to check the details. Click on the Edit icon to make any changes to the application. Click on the Submit button once the review is complete.
All content on this page by eGov Foundation is licensed under a Creative Commons Attribution 4.0 International License.
