OBPAS Citizen User Manual

Learn how to register new stakeholders, make payments, apply for building permits and occupancy certificates

Citizens

Citizens represent individuals, groups, and communities who are the building owners or occupants. The BPA module provides the citizens with the scope to view building permit applications submitted by the stakeholders or architects. They can request the stakeholders to make any changes in the application if required. Citizens approve the applications and make the payment.

The citizen can -

Register Stakeholders

The citizen user portal allows stakeholders to register themselves on the OBPAS system. Stakeholders constitute architects, builders, engineers, supervisors, or town planners. A unique license number is generated for each stakeholder on the system.

Citizens can have multi-stakeholder access. Hence, a citizen can be registered as an architect, a builder, and a normal citizen.

The registered stakeholder will have state-level access permission to apply for new building permits or occupancy certificates.

To register stakeholders

Navigate to the Building Plan Approval option in the sidebar. Click on the Register Technical Person/Builder card on the screen.

Select the applicable Technical Person License Type in the License Details tab.

Click on the Next Step button to move to the next section of the registration form.

Enter the Applicant Name. Select the applicable Gender of the applicant. Enter the applicant’s Date of Birth, Mobile No., Email, and PAN No. Enter the Permanent Address of the applicant. Scroll down to enter the Correspondence Address. Check the Same as Permanent Address box if both addresses are the same. This will auto-populate the permanent address as the correspondence address.

Click on the Next Step button.

Click on the Upload File button to upload the Required Documents for verification. The list of required documents depends on the selected licensee type. Click on the Next Step button to move to the Summary page of the application.

Check the box in the Declaration section to testify the submitted details in the application. Click on the Submit button. The application is submitted for further processing. A unique Application Number is generated by the system for easy reference. Make a note of this number to track your application status and details.

Now click on the Proceed to Payment button to pay the registration fee.

Click on the Make Payment button.

Select the preferred payment option. Enter the required details to process the payment.

The system displays the payment success acknowledgement message along with the Payment Receipt No. Click on the Download or the Print button above to download or print the payment receipt.

The registration application is now in queue for document verification and approval by the Document Verifier and Approver.

Once the stakeholder is approved the applicant receives a notification. In addition, the Building Permit New Construction, Occupancy Certificate New Building Construction, and the DIGIT DCR Scrutiny options are added to the system menu.

View Application Status

The view application option allows citizens to review the application submitted by the stakeholder. In case there are any mistakes or changes required in the application the citizen can request the stakeholder to make these edits.

To view application status

Navigate to the Building Plan Approval option in the sidebar. Click on My Applications.

The My Applications screen will list all the applications submitted by the stakeholders on behalf of the citizen. The application details will display the status of each application.

Click on the View Details button below the relevant application details. Scroll down the application to view the submitted details. Click on the View History button on the top of the application to check the task and activity updates on the application.

Request edits and approve applications

Building permit applications submitted by the architects or any other stakeholders are routed to the citizens or the owner to verify details. The owner reviews the application details and sends back the application to the stakeholders if there is any mistake or any changes required in the application.

To request edits or approve applications

Navigate to Building Plan Approval menu option in the sidebar. Click on My Applications.

Click on View Details button available for the relevant application.

Scroll down the application page to review the details submitted in the application.

Click on the Take Action button. Click on the Send to Architect button if some details require editing. This will open the Forward Application panel.

Enter the information you want to pass on to the architect in context to the application in the Comments section. Click on the Upload Files button to upload any supporting documents for the application.

Click on the Send To Architect button. The application is now in the stakeholder’s queue for further processing. Click on the Approve button if there are no changes required in the application. This will open the Forward Application panel.

Enter any Comments in context to the application in the panel. Click on the Upload Files button to upload any supporting documents for the application. Click on the Approve button. The system displays the approved success acknowledgement message.

Make Payment

The Make Payment button is enabled once the stakeholder submits the building permit or occupancy certificate application on behalf of the owner.

Click on Application No. for which payment has to be made. The Payment Information details are available on the top of the application.

Click on the Make Payment button at the bottom of the screen.

The Payment Collection Details panel displays the Total Amount payable towards Application Fee along with the break-ups.

Select the relevant payment method. Enter the payment details.

The payment success acknowledgement message is displayed along with the Payment Receipt No. Click on the Download button to view or download the receipt in pdf format or click on the Print button to print the receipt.

Stakeholders

Stakeholders represent the registered builders, architects, town planners, engineers or supervisors. The stakeholder role within the system encompasses submitting details for eDCR scrutiny, obtaining building permit orders, completion certificates, and occupancy certificates.

Stakeholders can

Register other stakeholders

Follow the steps outlined for Register Stakeholders in the Citizens section.

Submit for DIGIT-DCR Scrutiny

The DIGIT-DCR Scrutiny option in the BPA module allows stakeholders to upload and submit building plan diagrams. The scrutiny process checks if the drawing meets the required standards and applicable compliance guidelines. Once the scrutiny is complete, the plan is either approved or rejected depending on the scrutiny findings.

To submit plans and diagrams for DIGIT-DCR Scrutiny

Navigate to the eDCR Scrutiny menu option in the sidebar. Click on the New Building Plan Scrutiny card.

Select the applicable City for the proposed construction. Enter the Applicant Name. Click on the Upload File button to upload the plans and diagrams. The system accepts only .dxf files and the maximum file size should not exceed 30MB.

Click on the Submit button to submit the plans for scrutiny. Click on the Clear Form button to start a fresh application.

The system displays a success acknowledgement message along with a unique Building Plan Scrutiny Number. Note this number for future reference. This number is required at the time of applying for a new building permit.

Click on the Download or Print button to download or print the Scrutiny Report.

The system might reject the submitted building plan if there are any errors or omissions in the plan. Make the corrections and upload the plan for scrutiny once again. Click on the Download or Print button to download or print the Scrutiny Report.

Click on the Create Building Permit Application button to apply for a permit.

Follow the same steps to apply for Occupancy Certificate eDCR Scrutiny for New Building.

Low-risk building permit application

Stakeholders can apply for low-risk building permit applications following the same steps outlined above. Permits for building plans marked as low risk are processed immediately and the stakeholders can download the permit order after submitting the required documents and details.

The key parameters defining low-risk application categories include -

  • The height of the building is less than 10 meters

  • The building construction site does not fall in any airport zone

  • The building occupancy type is purely residential

The permit order issued for low-risk applications can be revoked by the State or ULB authorities if any inconsistencies or instances of non-compliance found during the verification and inspection process.

Apply for Building Permits for New Construction

Stakeholders can apply for building permits for new construction once the eDCR Scrutiny is approved.

To apply for building permits for new construction

Navigate to the Building Plan Approval menu option in the sidebar.

Click on Building Permit New Construction card. Select the City for the proposed construction in the popup window.

Alternatively, click on the Create Building Permit Application button once the DIGIT-DCR scrutiny is accepted.

The Apply for Building Permit form contains 5 sections - Basic Details, Scrutiny Details, Owner Info, Document and NOC Details, and Summary.

Occupancy, Application Type, Risk Type, and Service Type information in the Basic Details panel is auto-populated from the listed DIGIT-DCR scrutiny report. The Risk Type is Low in the case of low-risk permit applications.

Enter any additional comments in the Remarks field.

The system populates the current date as Application Date by default. In the Location Details panel enter Building/Colony Name, Street Name, Mohalla, Pincode, and GIS coordinates. The City field is auto-populated.

In the Details of Plot panel the Plot Area, and Khata No. are auto-populated from the listed eDCR reference document. Enter the Holding No., Plot No. (MSP), and Land Registration Details.

Click on the Next Step button to move to the Scrutiny Details section of the application form. The Scrutiny Details page displays the DIGIT DCR Number, a clickable link to download the Uploaded Diagram, and the Scrutiny Report.

The Occupancy, Sub-Occupancy, and Usage details are auto-populated from the eDCR report. Click on the Next Step button to move to the Owner Info section.

In the Owner Details panel select the applicable Owner Type and Type of Owner Subtype.

Enter the owner’s Mobile No., Applicant Name, Gender, Date of Birth, Email, Guardian’s Name, Relationship with guardian, PAN No., and Correspondence Address in the Owner Information panel.

Check the Is Primary Owner box if the person filling the application details is the primary owner. All system notifications will be sent to the primary owner.

Click on the Next Step button to move to the Document and NOC Details section.

Select the appropriate document type for each of the Required Documents categories. Click on the Upload File button to upload the documents. The permissible document file formats include .pdf and. jpeg extensions.

Scroll down the page to upload the Building Plan Diagram, Fire and Airport Authority NOC Details. If the users have the NOC documents click on the Upload button to attach the documents to the application.

Click on the Next Step button to review the application details. The Summary page displays the payable Application Fee details.

Once the owner approves the application it is put back in the stakeholder’s queue for submission. The stakeholder will find this application in the My Applications page with the status Stakeholder’s submission pending.

Click on the Application Number hyperlink to open the application. Check the Declaration checkbox at the bottom of the application. Scroll down the page and click on the Submit button.

The submit successful acknowledgement message is displayed on the screen. Click on the Make Payment button at the bottom of the screen to pay the application fees.

Apply for Occupancy Certificates for New Building Construction

Stakeholders can apply for occupancy certificates for new building construction once the occupancy eDCR Scrutiny is approved.

To submit for OC eDCR scrutiny

Navigate to eDCR Scrutiny menu option in the sidebar.

Click on Occupancy Certificate eDCR Scrutiny for New Building card. Select City.

Enter the applicable Building Permit Date and the Building Permit Number. Click on the search icon to populate the building permit details. Upload the Building Plan diagram.

Click on the Submit button to process the scrutiny.

Click on the Download or Print button to download or print the Scrutiny Report.

Click on the Create Occupancy Certificate Application button to proceed with the application or you can choose to proceed with the application later. Make a note of the OC Scrutiny Number that is required to create the application.

To apply for building permits for new construction

Navigate to the Building Plan Approval menu option in the sidebar. Click on Occupancy Certificate New Building Construction card.

Enter the applicable City for the new building construction.

Click on the Select button.

Enter the Occupancy Certificate Security Number. (The above steps are not required if the user has selected to create the OC application immediately after the OC scrutiny is completed).

The Application Type, Risk Type, Service Type, Applicant Name, Stakeholder Name, and Building Permit Number details will be auto-populated from the listed OC Scrutiny document.

The Application Date accepts the current date by default. Enter any comments in the Remarks field.

The Occupancy Certificate Scrutiny Details panel displays the eDCR Number, and a clickable link to download the Uploaded Image and Scrutiny Report.

The Actual Building Details are auto-populated from the scrutiny report. A Comparison Report is also generated at this stage. The comparison report provides a comparative assessment between the proposed construction and the actual construction diagram. This report can be downloaded once the OC application is submitted for further processing by the stakeholder.

Enter the Total Buildup Area (Sq Mtrs), Number of Floors, High From Ground Level from Mumty (In mtrs) details in the Actual Building Abstract panel.

Click on the Next Step button to move to the Documents and NOC Details section.

Select the appropriate document type for each of the Required Documents categories. Click on the Upload File button to upload the documents.

Click on the Next Step button to review the application details. The Summary page displays the payable Application Fee details.

Scroll down the page to review the application details. Click on the Send to Citizen button for final review and approval of the owner

To download the Comparison Report

Click on My Applications on the BPA home page.

Click on the relevant Application Number hyperlink to view the application.

Click on the Download or Print button to download the Comparison Report. This report is available for citizen download too.

Last updated

​All content on this page by eGov Foundation is licensed under a Creative Commons Attribution 4.0 International License.